IN STOCK AND READY TO SHIP

6000W PURE SINE WAVE INVERTER/CHARGER 24V 120/240VAC 60HZ

6000W PURE SINE WAVE INVERTER/CHARGER 24V 120/240VAC 60HZ

  • $1,999.00


6000 Watt Pure Sine Low Frequency Inverter, split phase with built-in battery charger and transfer switch. This inverter charger is perfect for large-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it. Use this product for renewable solar, off-grid, business back up power, mobile and emergency backup power applications anywhere that uses 100/110/120/220/230/240 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz.

This power inverter charger includes a powerful 80 amp charger and is capable of accepting any source of 230/2400v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home.

The 6000 watt inverter charger is capable of a 18000 watt surge for 20 seconds and can run at 6000 watts continuously. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 20 volts or 21 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it.

  • 6000 watt low frequency inverter
  • 18000 watt surge for 20 seconds 300% surge capability
  • 24 Volt DC
  • Single phase 120Vac output
  • Listed to UL 458 and CSA 22.2
  • Battery priority selector
  • Terminal block
  • Marine coated and protected
  • Multi stage smart charger 80 Amp
  • Remote panel available LED or LCD
  • Auto frequency
  • 10msec typical transfer time
  • Selectable 25W power save mode (hibernation)
  • 7 battery type settings for charger
  • Allows start up and through power with depleted batteries

Specifications:

    • Continuous output power: 4000 Watts
    • Surge rating: 12000 Watts (20 Seconds)
    • Output waveform: Pure Sine/Same as input (Bypass Mode)
    • Output voltage 100-110-120-220-230-240Vac
    • Output breaker: 40 Amps
    • Nominal efficiency: >88% (Peak)
    • Line mode efficiency: >95%
    • Output frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
    • Typical transfer time: 10ms (Max)
    • THD: < 10% DC
    • Ambient operating temperature: 14°F to 122°F (-10°C to 50°C)

  • Input Specifications
    • Nominal input voltage: 24.0Vdc
    • Minimum start voltage: 20.0Vdc
    • Low battery alarm: 21.0Vdc-22.0Vdc
    • Low battery trip: 20.0Vdc-21.0Vdc
    • High voltage alarm: 32.0Vdc
    • Low battery voltage restart: 26.6Vdc
    • Idle consumption: 52.5 watts
    • Idle consumption with power saver mode ON: <25 watts

    Charger Specifications
    • Output voltage: depends on battery Type
    • Charger rate: 80A
    • Over charge protection shutdown 31.4V
    • Selectable charge setting based on battery type
    • Adjustable charge current: off-15%-100%
    • Four stage smart charger

    Transfer Switch Specifications
    • 80 amp automatic transfer switch
    • 10 ms (max)

    Dimensions
    • Unit Weight: 108 lb.
    • Unit Size L x W x H: 19 x 16.5 x 8 inches
    • Shipping Weight: 113 lb
    • Shipping L x W x H 30.5 x 14.25 x 13.75 inches